VAN brands / NPK / Crop Force

Crop Force
NPKOwn-brand manufacturing

Crop Force

2 grades: N 15% · P₂O₅ 15% · K₂O 15% (NPK 15:15:15), and N 12% · P₂O₅ 12% · K₂O 18% (NPK 12:12:18)

Punjab soil tests, about 2016 to 2018

Crop Force supplies nitrogen, phosphorus and potassium. In Punjab soil tests from about 2016 to 2018, 87.8% of samples had less than 180 ppm of available potassium, and 97.9% had less than 15 ppm of available phosphorus, the levels that Punjab soil laboratories treat as adequate. These are historical measurements of Punjab’s soil, not results of Crop Force.

See the Punjab soil data in the Soil Atlas →

Most samples were low in both available phosphorus and available potassium, 2 of the 3 major plant nutrients.

Source: Punjab soil testing programme, 770,160 valid samples from 36 districts.

How it is applied
Side-dressingBand placement
Stage
Grand growthMaturity

Send the quantity you need and your district on WhatsApp. VAN replies with the price, whether the product is available, and how it can be delivered.

Specification

Product
Crop Force
Analysis
2 grades: N 15% · P₂O₅ 15% · K₂O 15% (NPK 15:15:15), and N 12% · P₂O₅ 12% · K₂O 18% (NPK 12:12:18)
Category
NPK
Application
Side-dressing · Band placement
Stage
Grand growth · Maturity
Availability
Own-brand manufacturingVAN makes your product to the same specification as Crop Force, on the same production line and with the same quality control. The product carries your label.
Registration
VAN holds a PSQCA (Pakistan Standards and Quality Control Authority) licence for Crop Force. Each batch is tested before dispatch in LAB 336, VAN’s own laboratory, which is accredited by PNAC (Pakistan National Accreditation Council) to ISO/IEC 17025:2017.
Lab report
Enter the batch number printed on the bag to open the lab report (certificate of analysis) for that batch. Verify a bag →
Application

Methods of soil application, in order of preference: drill at sowing, side-dress, broadcast

The crop’s response to the same amount of fertiliser depends on where the granules are placed. For granular fertilisers applied at or before sowing, VAN recommends these 3 methods in this order.

  1. 1 · preferredDrill at sowing

    What it means. The seed drill’s fertiliser box places the granule about 5 cm beside and below the seed row, never touching the seed.

    Why. Roots reach a drilled granule sooner than a granule placed by side-dressing or broadcasting. Of the 3 methods, drilling leaves the granule with the least contact with air, sunlight and the free calcium at the soil surface, and it places all of the fertiliser in the root zone.

  2. 2 · second choiceSide-dress

    What it means. The granules are placed in a band beside the row, by hand or with a planter, at sowing or at the first irrigation, and covered with soil.

    Why. The band is still close to the root, but it is placed less deep than a drilled granule, and it may be applied later, at the first irrigation.

  3. 3 · least preferredBroadcast

    What it means. The granules are spread over the field surface before the last ploughing or before an irrigation, and mixed into the soil.

    Why. Most of the fertiliser ends up away from the root, and most of it stays near the soil surface.

In the crop plans, Crop Force is applied by band placement or side-dressing at the grand growth and maturity stages.

Crop plans that use Crop Force

The crop plans show which crops use Crop Force and at which stage. The wheat plan does not use Crop Force. Open the crop plans →

Documents
Product deck, technical data sheet and safety data sheet

These documents explain what the product is, how it works, when in the season it is used and the limits on its use.

For distributors
Sell Crop Force in your territory
For farmers
Find the crops and stages for Crop Force
Also in NPK